The Extang CargoCleats Truck Bed Tie-Down Anchors # EX1932 have a 500 lb capacity. Additionally, the straps that are to be used with the tie downs need to have a high enough breaking strength capacity for the load you will be tying down, since the strap could have the lowest rated capacity of the whole tie down system.
I have included a link to a videos of the Extang CargoCleats Truck Bed Tie-Down Anchors, and to our selection of cargo tie down straps for you to select from. view full answer...
The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF will stick out from the bed rail differently for every truck model. The best way for you to know exactly how they will fit on your 2012 Ford Super Duty is to look at the overall measurements. I went out to the warehouse to measure the bracket and from the inside to inside at the widest point it is 10-3/4 inches.
You may also be interested in the Brophy Basic Turnbuckles w/ Hardware for Camper... view full answer...
The Extang CargoCleats Truck Bed Tie-Down Anchors # EX1932, have a weight capacity of 500 lbs each. You must make sure that the straps that you use also have enough capacity for your application. The tie-downs fit underneath the bed rails like in the video I have linked for you. I would say that most likely these would work just fine for you, but since you are very close to the capacity, I would suggest more than one set. view full answer...
The Extang CargoCleats Truck Bed Tie-Down Anchors - Clamp On - 500 lbs - Qty 2 # EX1932, have a weight capacity of 500 lbs each. You will have to also make sure that the straps that you use also have enough strengths for the application. The tie-downs fit underneath the bed rails like in the video I have linked for you. Provided there is nothing in the way they could fit your 2009 Dodge Ram 1500, they are a universal fit, but will not work if you have the OEM bed rail cap installed.
Since... view full answer...
As long as your 1997 Ford F-350 is not a step side, does not have a double wall bed, and is not a dually then the Brophy tie downs, # HSSF, will fit. The tie downs do not have an official capacity because they are rated for whatever the truck bed can handle. Consult your owners manual to determine the capacity.
I also recommend adding the hardware package # TDHP to secure the camper to the tie downs. view full answer...
So there actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs # LC236326-205221.
These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there isn't a designated weight rating. If a camper can fit the bed of your Ram, the HappiJac tie-downs will safely hold it in place.
The only other thing you will need with these tie-downs are turnbuckles, the HappiJac Qwik-Load Turnbuckles # LC182895... view full answer...
I went out to the warehouse to measure the Extang CargoCleats Truck Bed Tie-Down Anchors, # EX1932. The anchor that I measured was just a touch under 6-1/2 inches wide.
Take a look at the attached videos so see more. view full answer...
To add a set of Timbren Rear Suspension Enhancement to your 2005 Toyota Tundra 4WD, you will want item # TTORTUN4. This system is custom fit and has a 6,000 lbs capacity. This are our lightest capacity Timbrens for your truck and are still overkill for a 1,200 lbs camper. A better option would be the SumoSprings Solo Custom Helper Springs item # SSR-610-54. These have a 2,800 lbs capacity and only engage when you place weight on the rear suspension.
SumoSprings use a system called progressive... view full answer...
Brophy Camper Tie-Downs # HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed. view full answer...
The track of the Erickson O-Track tie-down anchors measure 2 inches wide and 1/2 inch tall by 18 inches long. This product would be a great choice for securing items in your truck bed. The anchors have a straight pull capacity of 733 lbs apiece and a side pull capacity of 583 lbs each.
I'll link you to a product video featuring the tie-down anchor system. view full answer...
There is no weight capacity for the Brophy Clamp On Camper Tie-Downs # HSSF.
The tie-down hardware kit # TDHP, that is used to secure the camper to the # HSSF tie-downs has a weight capacity of 3,000-lbs.
My contact at Brophy said the tie-downs will handle the camper and the concern would be if the truck capacity was not able to handle it, but with an F-350 you should have no issue.
Since the front tie-down is behind the camper tie-down, the rear tie-down must be forward of the camper... view full answer...
The TS (T-Slot) Rails for Truck Hero Elevate Rack Systems like part # TH65FR can be used for many things such as mounting a ladder rack or using the included tie-downs. I don't have a weight capacity for these tie-downs but they should work to hold most smaller items without issue. If you need to secure heavier objects you should be using the tie-down points inside the truck bed. The TS (T-Slot) Rails for Truck Hero Elevate Rack Systems are bolt-on options which is what makes them so popular. view full answer...
I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over 5 1/2" wide on the top side and there needs to be a space of at least 2" wide on the underside of the railing.
I've attached an installation video to help you as well.
For turnbuckles I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper... view full answer...
I went out to the warehouse to take a look at the Brophy Camp On Camper Tie-Downs # HSAB referenced in your question. From the tie-down where it will clamp onto the inside of the bed rails to the outermost part of the unit, I measured a distance of right at 11-1/2 inches. I have attached an image with this measurement labeled.
As long as the jacks on your camper extend out further than this measurement, you will have no interference issues with these tie-downs. I have also attached a short... view full answer...
Yes, the BullRing Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Flush Fit - 1,000 lbs - Qty 6, part # BU28FR, will fit your 2016 Ford F350. Each of these tie-down anchors are rated for 1,000 lbs. view full answer...
The steel Torklift camper tie downs that fit your 2018 Ford F-350 long bed part # TLF2021 and # TLF3008 weighs 74 lbs total whereas the aluminum version part numbers # TLF2021A and # TLF3008A weigh 66 lbs so it's about 8 lb lighter. view full answer...
After speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down # HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle owners guide to find the weight limit of your cargo bed.
You will also need to ensure there is at least 2 inches of space between the truck bed interior wall and the lip of the bed in order for the hold downs to fit properly. I have included... view full answer...
On the Brophy Clamp On Camper Tie Down part # HSWB the horizontal distance from the beginning of the angled portion of the tie down to the end is 6 inches. view full answer...
I have a solution for you. Technically, the TuXport Soft Tonneau Cover # TX281601 can hold up to 200 pounds of evenly distributed weight on the cover and will fit your 1999 GMC Sierra (8-ft. bed). However, there would be difficulty with securing the kayaks to your truck without a crossbar system.
With that being said, the safest way to transport your 2 kayaks would be a ladder rack system like the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A70570. The Adarac... view full answer...
Each of the anchors in the BullRing Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Flush Fit - 1,000 lbs - Qty 4, part # BU22FR, are rated for 1,000 lbs. Please keep in mind these are not the anchors compatible with your 2019 Chevrolet Silverado 2500. The Bull-Ring Tie-Down Anchors for your vehicle are part # BU23FR. They are also rated 1,000 lbs per tie-down.
I have included a product description link below. view full answer...
Go To Results